aquagem electric

Sometimes, our pool pumps don't need to run at high speeds. Because the swimming pool pump has been running at high speed for many times, it will cause a certain waste of efficiency. Usually, many people choose a timer to run the pump in a time period. Now, we give you a better solution -- inground pool pump timer . Inground pool pump timer is a swimming pool pump inverter with a timer. In addition to the operation of setting 4 time periods, the running frequency of each time period can be different. This allows the pool pump to run at different speeds depending on your needs. At the same time, the inground pool pump timer can actually help you save your energy bill. Because you don't need high speed operation, your pool pump has already done the energy saving for you.

Normally private swimming pools are not very big, you can empty the water, the swimming pool clean, re-filled with water. But we should pay attention to this time, swimming pool moss is mainly due to the lack of disinfectants in the water, water acidity and alkalinity imbalance and other issues. I don't know if your swimming pool is equipped with an automatic disinfection system. If not, make sure there is enough chlorine in the pool water. If only this disinfectant is used to ensure that enough chlorine is available, the general swimming pool water will not be mossy. Natural circulation equipment must be opened regularly. If your pool pump in your circulatory system has a fixed speed, you are advised to add a pool pump speed controller . This allows you to adjust your pool pump to different speeds as needed, saving you energy bills. Swimming is one of the effective ways to lose weight.

Sand filter cylinder can be used in swimming pool, water park filtration, drinking water pretreatment and other water purification and circulation systems. Filters use special sand filters to remove minute contaminants from the pool. As a medium to remove dirt, the filter is filled into the chamber of the filter. When the pool water containing suspended particulate matter is pumped into the filter line, it is guided to the outlet of the filter by the control switch. The water in the pool passes through the filter, and the tiny dirt is filtered out by the sand trap. The filtered water is returned to the pool by the control switch at the bottom of the filter. The whole process is continuous and automatic and provides a complete cycle for the pool filter and piping system. The filter has been used for a period of time, and accumulated filth holds back the flow of water to weaken it. This is the time to clean the filter. The pool pump is called the heart of the pool filtration system...

In the coastal cities, there are always many typhoons landing every summer. Many outdoor pools are susceptible to rain, falling leaves, blackouts, flooding and insects. In the face of such drastic changes in external conditions, the main management is to consider cleaning and swimming pool water quality. Now, I give you a more flexible choice! Single speed pool pump combined with pool pump speed controller ! This will allow you to save energy without having to immediately eliminate your single speed pump and buy a variable speed pump. You just need to spend a little money on the speed controller. Perfect choice, isn't it? Power outages in typhoon seasons are prone to occur. The machine room with pneumatic or electric valve control must ensure the valve position when the power is cut off, so as to avoid accidental drainage. The code of first cleaning and re-filtration should be adhered to at the time of re-electricity. The fallen leaves are the most disgusting thing in the outdo...

The equipment of the swimming pool is prone to aging, corrosion and shedding. Therefore, the equipment of swimming pool, especially the energy saving pool pump , should be maintained in the process of use. 1. Regular cleaning. The equipment of swimming pool, especially the energy saving pool pump, will inevitably have a lot of dust on its pollution-prone parts in the process of use. If it cannot be cleaned in time, the dust will become larger and larger, and eventually form stubborn stains, which is quite harmful. Therefore, people must regularly wipe the dust on the energy saving pool pump with clean towels to prevent these stains from affecting the water quality. 2. Regularly check all parts of swimming equipment, especially energy saving pool pump. Once a part is found to have obvious abnormality, such as loose, aging, etc. Depending on the loss, if the component is badly damaged, it must be replaced in time. If the parts are only slightly worn, professional maintenance can be r...

Pool pump frequency inverter is the core part of the entire inverter pump system. The pump motor is the output link, and the speed is controlled by the inverter to achieve rate control. The pool pump frequency inverter accepts the user’s signal to control the speed of the pool pump, and the frequency inverter changes the frequency to control the pump speed of the pool, realizing a closed loop control system. It is convenient for the pool owner to change the operating power of the pool pump according to different usage needs, thereby achieving the purpose of energy saving and noise reduction. This eliminates the need to replace existing single-speed pool pumps and meets most of the requirements for frequency conversion. Pool pump frequency converter is really a good companion for the general family swimming pool.

The pool water circulation purification system can be said to be considered as a support system for the swimming pool. The principle is to use the water pump as a power to push the pool water to flow continuously between closed pipes, equipment and swimming pools. Its function is to remove the impurities in the water through the filtering equipment in the system, so as to facilitate the uniform and effective diffusion of the disinfectant added by the disinfection equipment in the system, and reduce the influence of the impurities on the heating efficiency of the heating device. The pool pump is the center of the system. How to choose a swimming pool pump that suits you is simple. It is recommended to use both the pool pump and the pool pump frequency inverter . This is more functional and saves energy.

The water centrifugal pump is generally used in the swimming pool, which can be divided into the water centrifugal pump and the special circulation pump for swimming pool. For better results, you can add a pool pump frequency converter . The main control parameters of the swimming pool special circulation pump are pump shell material, impeller material, flow rate, head, power, efficiency, etc. The water pump used in the swimming pool should be copper, stainless steel, plastic and other corrosion-resistant materials to make the impeller or pump shell. Use a good quality pool pump frequency converter, you can upgrade your pump into the frequency pool pump. This will not only extend the life of your pump, but also reduce the running cost of your pool pump.  GMIIIIIC

Many pool pump equipment have problems such as low efficiency, high energy consumption and noise. The special pool pump frequency inverter is designed for energy saving control of pool pump. This is a good solution to the problem above. The pool pump frequency inverter has the following characteristics. First, the design of the constant pressure energy saving control of the pump. Second, time division multipoint frequency inversion timing function can be realized. Third, energy efficiency. Fourth, simple management, safety protection, automation control. Fifth, prolong the service life of equipment, protect the stability of power grid, protect the wear and reduce the failure rate. Aquagem's pool pump frequency inverter is a good choice.